Removal Of Mechanism Unit And Vtr C.b.a - Panasonic AG-DVX100BP Service Manual

7. Removal of Mechanism Unit and
VTR C.B.A.
1. Remove the Grip Unit.
2. Disconnect 3 connectors P1501, P4001 and P3001
on VTR C.B.A.
P1501
P2003
3. Unscrew the 4 screws (H) and remove the
Mechanism Unit (with VTR C.B.A.).
NOTE: When lift up the Mechanism Unit (with VTR
C.B.A.) to remove Mechanism Unit (with
VTR C.B.A.), be careful because the 3
connectors on VTR C.B.A (P2001, P2002
and P2003) are combined.
Please lift up
mechanism chassis (There is a possibility
of giving the warp to the mechanism
chassis because the connector is hard
when only the mechanism chassis is lifted
up by hand).
Also do not damage the Cleaning roller.
Check the connector has been connected
securely when the Mechanism Unit (with
VTR C.B.A.) is installed.
SCREW (H) & (I)
4mm
SILVER
P4001
P3001
the VTR C.B.A. with
SCREW (H)
P2002 connection
4. Disconnect the connector P5001 on VTR C.B.A.
5. Disconnect the connectors P2201, P2202, P2203,
P2204 and on VTR C.B.A..
6. Unscrew the 3 screws (I) and remove the VTR
C.B.A..
P2203
P2204
DIS-6
P2003 connection
P2001 connection
P5001
P2201
P2202
SCREW (I)
P2210