White Balance Adjustment (4500K) (Auto) - Panasonic AG-DVX100BP Service Manual

4-6-3. White balance adjustment (4500K) (Auto)

< In case of NTSC model >
1. Set the Color Conversion filter (LB120: VFK1347) to the CC Filter Holder (VFK1345).
< In case of PAL model >
1. Set the Color Conversion filters (LB80: VFK1342) and (CC C20: VFK1887) to the CC Filter Holder (VFK1345).
< Common procedures >
2. Set the one Step-down Ring (VFK1346) and two Step-up Rings (VFK1659, VFK1660) to the CC Filter Holder as
shown in figure.
3. Set the 72mm Attachment Ring (VFK1809) to the front of Lens.
4. Set the CC Filter Holder with Step-up & down Rings to 72mm Attachment Ring (VFK1809).
VFK1345
5. Aim the Camera-Recorder at grayscale chart under the Halogen lamp condition (3100K, 2000Lux).
6. Double-click the adjustment item "White balance (4500K)" in the main menu. The following screen will appear.
7. Click "Execute(E)" button. Automatic adjustment starts.
8. After adjustment has been completed, click "Close(C)" button to escape this menu.
CC Filter Holder
CC Filter Step Up Ring
(LB120) (49→62)
NOTE: Above figure shows in case of NTSC.
Step down Ring
(62→52)
Set to 72mm Attachment Ring (VFK1809)
Step Up Ring
(43→49)
ELE-14