Panasonic AG-DVX100BP Service Manual page 26

5-3-1. Setting item for LISTA Measurement
ATF GAIN
The speed of the tape changes if this item set to "ON" for the ATF sensitivity confirmation.
After selected "ON", By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
menu once. The VTR mode is operated when the menu mode is exited temporarily. The screen below is displayed.
NOW SERVO ADJUST
PUSH MENU TO RETURN
It will be returned to ADJUST MENU when the MENU button is pressed in this condition.
ADJUST MENU
ATF GAIN
LINEARITY
AUDIO FILTER
Y LEVEL
C LEVEL
DEBUG DISP
DEBUG MODE
LCD OFFSET
PUSH MENU TO EXIT
LINEARITY
The ATF sensitivity changes if this item set to "ON" for the LINEARITY confirmation.
After selected "ON", By pressing SET(STILL) of OPERATION LEVER, enter the adjustment mode and then exit the
menu once. The VTR mode is operated when the menu mode is exited temporarily. The screen below is displayed.
NOW SERVO ADJUST
PUSH MENU TO RETURN
It will be returned to ADJUST MENU when the MENU button is pressed in this condition.
After selected "ON", By pressing SET(STILL) of OPERATION LEVER
OFF
OFF
OFF ON
ON
1B
27
OFF
OFF
OFF
(Adjustment mode screen)
NOW SERVO ADJUST
PUSH MENU TO RETURN
Press MENU button.
INF-14