Adjustment Item For Video Level; Dif Status Display - Panasonic AG-DVX100BP Service Manual

5-1-4. Adjustment item for Video Level

Y LEVEL
Y level of VIDEO OUT and S-VIDEO OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Luminance level adjustment in EVR adjustment.
C LEVEL
C level of VIDEO OUT and S-VIDEO OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Chroma level adjustment in EVR adjustment.

5-1-5. DIF Status Display.

SERVICE MENU
CYLINDER
TAPE RUN
THREADING
Y LEVEL
C LEVEL
DIF INFO
DEBUG DISP
DEBUG MODE
PUSH MENU TO RETURN
NORMAL: The DIF STATUS display is updated every five frames.
FAST: The DIF STATUS display is updated every frame.
Factory default setting is "OFF".
Items
NODECNT Number of NODE connections.
MY_ID NODE ID of this unit.
ROOT_ID ROOT ID
IRM_ID PHY ID of IRM
IN_CH Input channel number of Isochronous data.
OUT_CH Output channel number of Isochronous data.
DIFMODE DIF mode
RX_IN Received condition of Isochronous data.
O_BCC Transmitted condition of Isochronous data.
STYPE Type of VIDEO signal
FIELD NTSC/PAL
SPEED Speed of Isochronous data.
UID USER ID of 1394 equipment
AS Source pack of AUDIO
ASC Source control pack of AUDIO
VS Source pack of VIDEO
VSC Source control pack of VIDEO
HEADER HEADER pack
10000H
10000H
10000T
1B
27
OFF
OFF
NORMAL
OFF
FAST
OFF
Description
INF-10
Set the item "DIF INFO" to NORMAL
or FAST and it does ON/OFF of the
DIF STATUS display by pressing the
MODE CHECK button on normal
screen.
Remark
IRM(Isochronous Resonance Manager)
IN_SPD in VCR MODE