Display" Off Status; Machine" Off Status; Delay Start; Memory - Miele PWM 908 Operating And Installation Instructions

Supervisor level

"Display" off status

The display switches off to save en-
ergy. The Start/Stop sensor control
flashes slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min.) Not curr.prog.
The display will remain on while the pro-
gramme is running but will go out
10 minutes after the end of the pro-
gramme.
Logo (10 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 10 minutes after the end of the pro-
gramme.
On after 10 min.
The display will go out after 10 minutes.
On (30 min.) Not curr.prog.
The display will remain on while the pro-
gramme is running but will go out
30 minutes after the end of the pro-
gramme.
Logo (30 min.) Not curr.prog.
The display stays switched on while the
programme is running. The logo lights
up 30 minutes after the end of the pro-
gramme.
On after 30 min.
The display will go out after 30 minutes.
88

"Machine" off status

In order to save energy, the washing
machine will switch off automatically
after the end of the programme or if no
further selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
– The machine does not switch off
– The machine switches off after
15 minutes (factory default)
– The machine switches off after
20 minutes
– The machine switches off after
30 minutes

Delay start

The delay start (timer) display can be
switched on or off.
Factory setting: On

Memory

The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
When the programme is chosen again,
the saved settings will appear in the
display.
Factory default: Off