Table of Contents
Advertisement
Display off status
The display switches off to save en-
ergy. The Start/Stop sensor control
flashes slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min.) Not curr.prog.
The display will remain on while the pro-
gram is running but will go out 10 min-
utes after the end of the program.
Logo (10 min.) Not curr.prog.
The display stays switched on while the
program is running. The logo lights up
10 minutes after the end of the pro-
gram.
On after 10 min.
The display will go out after 10 minutes.
On (30 min.) Not curr.prog.
The display will remain on while the pro-
gram is running but will go out 30 min-
utes after the end of the program.
Logo (30 min.) Not curr.prog.
The display stays switched on while the
program is running. The logo lights up
30 minutes after the end of the pro-
gram.
On after 30 min.
The display will go out after 30 minutes.
Supervisor level
Machine off status
In order to save energy, the washing
machine will switch off automatically
after the end of the program or if no
further selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
- No switch off
- Switch off after 15 minutes (factory
default)
- Switch off after 20 minutes
- Switch off after 30 minutes
Delay start
The delay start (timer) display can be
switched on or off.
Factory default: On
Memory
The washing machine will save the
settings (temperature, spin speed, and
some of the options) which have been
selected for a program after the pro-
gram has started.
When the program is chosen again, the
saved settings will appear on the dis-
play.
Factory default: Off
87
Advertisement
Table of Contents
