Special Programmes; Sort Programmes; Prog. Colour Allocation; Hygiene - Miele PWM 908 Operating And Installation Instructions

Special programmes

You can put together 5 special pro-
grammes and save them as your own
wash programmes with your own pro-
gramme names.
You must have already activated Spe-
cial programmes under Programme
packages.
Enter the name of your special pro-
gramme and its basic settings into the
"Special programmes" table under the
"Programme chart".
– Temperature: you can select a tem-
perature in multiple increments from
cold to 90 °C.
– Wash block: you can select one or
more wash blocks.
– Spin speed: you can select a spin
speed in increments from 600 rpm to
1400 rpm.

Sort programmes

Programmes can be moved within the
programme list and in the Favourites
list.
Factory default: Off
Moving programmes
 Touch the sensor control for the pro-
gramme you want to move.
 Press and hold the sensor control un-
til the frame changes.
 Drag the programme to the required
place.
Supervisor level

Prog. colour allocation

You can assign a colour to a Favourite
programme. In the list of Favourites,
each Favourite programme is given a
coloured frame, which can be adjus-
ted.
Factory setting: On

Hygiene

The Maintenance wash hygiene
gramme is shown in the list of special
programmes.
If a programme at a temperature below
60 °C has been used, a request to start
the Maintenance wash hygiene
gramme appears in the display.
Factory default: Off

Disinfection prog. code

A code has to be entered to cancel a
disinfection programme. The code can
be modified.
The code is: 0 0 0
Make a note of your new code if you
ever change it.
pro-
pro-
91