Table of Contents
Advertisement
Rev. 1.1
1 Introduction
The MINI full-jet valves of the VMS-08 series are suitable for the application of oils, separating agents and
other fluid media where the liquid will be applied as dots or lines. Depending on the viscosity of the applied
medium, the application pattern can be individually adjusted via the needle stroke. Three hose are employed
for supplying control air for opening, control air for closing and medium. The full jet valves of the VMS-08
series are precision tools. Always keep clean and observe minimum instructions to maintain a long useful life
of the valve.
1.1 Target Group of the Assembly Instructions
Operating Personnel
Maintenance Personnel
1.2 List of Signs and Symbols
The assembly instructions warn users of operations which may put their health at risk.
The warnings are indicated by combinations of text and symbols as follows:
DANGER
Describes a potentially dangerous situation.
Death, grievous bodily harm or severe material damage WILL occur if the respective
measures of precaution have not been taken
WARNING
Describes a potentially dangerous situation.
Death, grievous bodily harm or severe material damage MAY occur if the respective
measures of precaution have not been taken.
CAUTION
Describes a potentially dangerous situation.
Slight injuries CAN occur if the respective measures of precaution have not been
taken. This signal word is also used to describe possible property damages.
IMPORTANT
Indicates tips for usage and other particularly useful information.
No dangerous situation.
2 Safety
2.1 General Information
The construction of this incomplete device is according to the latest technology and is absolutely reliable.
The individual components as well as the complete device are continuously checked by our quality man-
agement.
2.2 Dangers from Residual Energy
Please instruct the operating personnel on the respective measures to be taken against the occurrence of
mechanical, hydraulic, pneumatic and electric / electronic residual energies.
Assembly Instructions - MINI-Full-Jet Valve VMS-08
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 5 of 16
Advertisement
Table of Contents
