Table of Contents
Advertisement
Rev. 1.1
EC Declaration of Incorporation
in accordance with EU Machinery Directive 2006/42/EU, dated 17 May 2006, Appendix II B
We herewith confirm that the below mentioned incomplete device meets the basic requirements for
safety and health as stated in EU Machinery Directive 2006/42/EU for its design and construction
as well as for the configuration released by us on the market. This machine component will not be
operated before it has been determined that the incomplete system where the machine component
will be installed also meets the requirements of the Directive (2006/42/EG).
Manufacturer
Walther Systemtechnik GmbH
Hockenheimer Straße 3
D- 76726 Germersheim
Description
VMS-08 MINI-Full-Jet Valve, Article No. V08-...
We also declare the conformity with other, product-relevant directives/guidelines:
Mach. Direct. 2006/42/EU App. I, Clause: 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.3.2, 1.3.3,
1.3.4, 1.5.9
EMC Directive 2004/108/EU, dated 15 December 2004
Applied harmonized standards, in particular:
DIN EN ISO 12100
In addition, we also confirm that the special documentation according to Appendix VII Part B has
been prepared.
The manufacturer, respectively his authorized representative obligates himself to submit this documentation
to the market surveillance authorities, if requested.
This EC Declaration of Incorporation becomes invalid if the incomplete device will be altered or changed
without consent of Walther Systemtechnik GmbH.
Authorized representative for Technical Documentation
Stefan Hirl, Hockenheimer Straße 3, D- 76726 Germersheim
Germersheim, 19 October 2017
(Place, Date)
Assembly Instructions - MINI-Full-Jet Valve VMS-08
Safety of Machinery – General Design Principles –
Risk
Assessment
and
12100:2010)
:
(Stefan Hirl, Management)
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 4 of 16
Risk
Reduction
(ISO
Advertisement
Table of Contents
