Leveling Treadmill - Landice 90 Series Installation Manual

Leveling Treadmill

2.6. Leveling Treadmill
1. Ensure that all feet touch the floor: Loosen the 19mm Jam Nut and
the 14mm Adjustment Nut using open end or adjustable wrench
and turn the Adjustment Nut until the foot touches the floor (Figure
2-28).
Figure 2-28. Leveling Feet
14mm Adjustment
Nut
CAUTION
ATTENTION
2. Place a level across the rear of the machine and stand in the
middle of the running surface, facing the rear of the treadmill.
Check if the bubble is centered on the level.
• If the bubble goes to the right (while standing on treadmill),
adjust the left rear foot. Loosen the 19mm nut by turning it
clockwise and rest it against the 14mm nut. Turn the 14mm nut
clockwise to raise the foot. Stop adjusting the foot when the
bubble is centered on the level.
• If the bubble goes to the left (while standing on treadmill),
adjust the right rear foot. Loosen the 19mm nut by turning it
clockwise and rest it against the 14mm nut. Turn the 14mm nut
clockwise to raise the foot. Stop adjusting the foot when the
bubble is centered on the level.
There must be a minimum of 150 pounds on the
treadmill's side steps for the reading to be
accurate.
Il doit y avoir un minimum de 150 livres sur les
étapes latérales du tapis roulant pour que la
lecture soit précise.
19mm Jam Nut
Increase Height
Decrease Height
Installation
23