Step 4: Routine Pool Care - King Technology New Water Series Instruction Manual

Step 4: Routine Pool Care

Run fi ltration system enough hours
1.
to circulate all water 1 to 2 times per
day. More than that could result in
over chlorination.
WARNING
To prevent the build up of gas pressure in the New Water
System, be sure the pool return line valves are open except
when opening or servicing the unit.
2.
Regularly test water with to maintain
pH and Total Alkalinity.
NOTE: Water balance is affected
Pool
and
by bather load, chemical usage,
Spa
Test
evaporation and the makeup of
Strips
source water, so maintaining water
balance regularly is important.
3.
Maintain 1.0 - 3.0 ppm free chlorine
level at all times.
DANGER
Do not contaminate the New Water Cycler or New Water
Cycler Pacs with dirt, organic matter, pool chemicals
(such as calcium hypochlorite or pool shocks), fertilizers
or other household chemicals. Contact between any
of these substances and the New Water Cycler or New
Water Cycler Pacs will result in a chemical reaction
with the generation of heat, liberation of hazardous
gasses and fi re or explosion.
Shock the pool every week or as
4.
needed with a non-chlorine or
chlorine shock.
DANGER
• Never add any other types of chlorine, pH adjusters,
shock treatments or algaecides through the skimmer.
These products should be added directly into the
pool if required.
• Never use fast dissolving chlorine tablets, liquid
bleach, or calcium hypochlorite in the New Water
Cycler.
17