Pgm Base Time; Pgm Override; Pgm Timer - Paradox Digiplex NE DGP2-641 Reference And Installation Manual

5.3 P GM Ba se Tim e
S [006]: O
EC TION
If the keypad's on-board PGM is set in PGM Timed Mode (see
section 5.2 on page 17) you must define whether the value
programmed in s ection [008] is in minutes or s ec onds.
Option [3] OFF = PGM Base Time is 1 s ec ond (default).
Option [3] ON =
5.4 P GM Ove rride
S [006]: O
EC TION
When the PGM ov erride is enabled, the keypad's on-board PGM
will ignore PGM Ac tivation Ev ents (section section 5.6 on page
19, page 19), PGM Deac tivation Events (section s ection 5.7 on
page 19, page 19), and PGM Timers (s ec tion section 5.5 on
page 18, page 18). It will remain in its normal state until the PGM
Ov erride is disabled. This option may be us ed to test the PGM
connections.
Option [4] OFF = PGM Override disabled (default).
Option [4] ON =
5.5 P GM Time r
S [008]
EC TION
If the keypad's on-board PGM is in PGM Timed M ode, the value
programmed in s ection [008] represents how long the PGM w ill
remain in its opposite s tate (see section 5.1 on page 17) after
being activated. To program the timer, enter a 3-digit decimal
18 R eference & Installation Manual
[3]
PT ION
PGM Base Time is 1 minute.
[4]
PT ION
PGM Override enabled.