Copy The Keypad Contents To The Memory Key - Paradox Digiplex NE DGP2-641 Reference And Installation Manual

keypad's programming mode and enter section [510].
3. When the keypad emits a confirmation beep, wait 5
seconds and remove the memory k ey after the second
confirmation beep.
3.6 Copy the Ke ypad Contents to t he Mem ory Key
S [520]
EC TION
1. Insert the memory key onto the k ey pad's connector
labelled "
the write protect jumper is ON (refer to Figure 3.1).
2. To c opy the contents to the memory key, enter the
keypad's programming mode and enter section [520].
3. After the c onfirmation beep, wait 5 s ec onds and remove
the memory key after the s ec ond confirmation beep. Set
the memory key's jumper to OFF if you do not wish to
accidentally ov erwrite its contents (refer to Figure 3.1).
" (refer to F igure 2.1 on page 5). Ensure that
KE Y
Figure 3.1: PMC-3 Jumper Settings
Digiplex/DigiplexNE LCD Keypad 9n