Avaya S8300 Hardware Installation page 4

!
WARNING:
Failure to install both grounds will void the Product Safety certifications (UL and the CE Mark)
on the product and create a hazard that could result in death or severe personal injury.
LASER Product
The equipment described in the documentation for this product may contain Class 1 LASER Device(s). The
LASER devices operate within the following parameters:
• Power output –9.5 dBm to -4 dBm
• Wavelength 1285 nm to 1343 nm
CLASS 1 LASER PRODUCT EN 60825-1:1994 + A11, EN60825-2:194, EN60950:1992 + A1 + A2 + A3.
Laser components used in the G700 are Class 1 Laser Products that comply with 21CFR 1040.10 and CFR
1040.11. Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Contact your Avaya representative for more laser product information.
Luokan 1 Laserlatte
Klass 1 Laser Apparat
Rack-Mounting
!
WARNING:
Warning: if the rack is not securely fixed in place, do not proceed with the installation.
!
WARNING:
Balancing the G700 Media Gateway requires two people. Use caution to avoid injury.
!
WARNING:
If the G700 Media Gateway is being mounted in a rack with other equipment already installed,
the G700 Media Gateway must be positioned to avoid imbalance.
Technical Specifications
Table 1. Technical Specifications
Chassis Dimensions
Height
Width
Required Clearances
Front
Rear
Temperature Tolerances
Recommended
!
WARNING:
Installation in a Restricted Access Location is required in Finland and Norway.
2U (3.5 in) 88 mm
19 in 482.6 mm
12 in 30 cm
18 in 45 cm
65 to 85 deg Farenheit
Depth 17.7 in
Weight empty 22.25 lbs
Weight (with 27-34 lbs
media modules)
consistent with EIA 464 data rack standards
18 to 29 deg Celsius
450 mm
10 kg
12-16 kg