Setup Functions - Kemppi MinarcTig 180MLP Service Manual

Setup functions

Name on Parameter
display value range
A 0 or 1
B 0 or 1
C 0 or 1
d 0,1,2 or 3
E 5 ... 40%
F 0 or 1
h 0.0 ... 2.0s
J 0.0 ... 10.0s
L 5.0 ... 20.0s
o 15 ... 99s
S -3 ... 5
t -9 ... 0
( Available from program version 0A7 )
Factory
setting
0 End current level selection. 1=5A, 0=15%
0 Open-circuit voltage selection. 1=30V (VRD), 0=95V
0 Forced stop during downslope with a brief pressing of the switch. 1=On, 0=Off
1 Alternative switch logic. 0=4T LOG,
20% Start current level as % of the welding current.
0 Restore factory settings. 1=Restore, 0=No restore
0s Minimum setting of pre-gas time.
1.0s Minimum setting of post-gas time.
10.0s Maximum setting of pre-gas time.
30s Maximum setting of post-gas time.
0 Arc dynamics (Arc Force)
0 Electrode ignition pulse. -9=No pulse, 0=Max pulse
Description
1=Minilog,( 2=4T-LOG+Minilog, 3= Minilog+ search arc )
15