Get Atmel Studio 7.0; Get Iar Embedded Workbench For Avr; Get Device Support - Microchip Technology ATmega4809 Xplained Pro Getting Started

3.4

Get Atmel Studio 7.0

Web page: http://www.microchip.com/development-tools/atmel-studio-7
Document/file:
• Atmel Studio 7.0 (build 1645) Installer (.exe)
Atmel Studio 7.0 or later is the preferred IDE for developing and debugging firmware for the megaAVR
0-series.
For device support, refer to
3.5

Get IAR Embedded Workbench for AVR

Web page: https://www.iar.com/iar-embedded-workbench/#!?architecture=AVR
Document/file: IAR Embedded Workbench
3.6

Get Device Support

Atmel Studio: Support for new devices in Atmel Studio can be added by using the Device Pack
Manager, which is found under Tools->Device Pack Manager.
®
For megaAVR
1. Click Check for Updates
2. For megaAVR
3. Click Install
For offline installers, go to http://packs.download.atmel.com/. To install a pack, double click on the
installer file and follow the instructions. Any open Atmel Studio windows will have to be closed for the
installation to take effect.
IAR: Support for new devices in IAR Embedded Workbench can be added by installing the latest service
pack. The service pack is available from My Pages on https://iar.com.
©
2018 Microchip Technology Inc.
Get Device Support.
0-series, update to the latest version by performing the following steps:
®
0-series, select the latest available version of ATmega_DFP
®
installer for AVR.
Application Note
AN2653
Get the Tools
®
DS00002653A-page 9