The Web Interface; Other Setting - GeoVision GV-FWC Installation Manual

4. The Web Interface

The following covers all of the settings available on the GV-FWC Web interface, aside from
Network and Wiegand Setting (see 2.3 Accessing GV-FWC and 3. Establishing
Communication, respectively), which include: Other Setting, Input Setting, Output Setting,
In/Out Monitor, Firmware Update, Account Setting, Wiegand Port Monitor and System Log
Viewer.

4.1 Other Setting

In the left menu, click Other Setting. This page appears.
[Device ID] Select a desired ID for the device.
[Mac Address / Firmware Version] Indicates the MAC address of the network medium and
the Ethernet module version of GV-FWC.
[Reboot System/Set Default]
Reboot System: Performs a warm boot of GV-FWC. This operation keeps the current

configuration.
Default Value: Resets all configuration parameters back to factory settings. This may

take 3 ~ 5 minutes to complete.
GV-FWC 16 Date: 7/30/2019