Establishing Communication; Configuring For Communication On Gv-Fwc - GeoVision GV-FWC Installation Manual

3. Establishing Communication

For GV-FWC to receive Face IDs recognized from GV-Face Recognition Camera and send
the paired access card data to GV-AS Controller, the necessary communication between
them must first be established. To do so, refer to the sections below.
Note: Make sure the GV-FWC, GV-Face Recognition Camera and GV-AS Controller are all
connected to the same LAN.

For the required settings on GV-FWC, see 3.1 Configuring for Communication on
GV-FWC.

For GV-Face Recognition Camera to send Face IDs to GV-FWC upon recognition, see 3.2
Sending Face IDs from Camera.

3.1 Configuring for Communication on GV-FWC

For the GV-FWC to receive Face IDs and send the paired access card data to GV-AS
Controller, follow the steps below:
1. In the left menu, click Wiegand Setting. The Controller Connecting Setting page
appears.
2. Under MAC Address, type the MAC address of the GV-Face Recognition Camera you
want to receive the Face IDs from.
GV-FWC 12 Date: 7/30/2019