Save And Restore Settings - GE QuickPanel+ IC755CxS06RDx User Manual

Save and Restore settings

'Save and Restore Settings' enables to store the settings of certain parameters of QP+ to a file (the
extension of this file '.qps') and then apply/restore the saved settings back to the same QP+ or any other QP+ from
the saved '.qps' file, whenever required.
Menu Item Location
The menu item for launching the feature is present in the 'System' menu.
The 'Save and Restore Settings' dialog box has to two tabs – 1) Settings and 2) Registry
'Settings' Tab – This tab has the different names of different settings that the user can select to save the settings
value to the file.
Note: 1. The settings tab of 'Save and Restore Settings' dialog is not used for setting the values for any device
parameters. It is only used to make selection of the parameter settings, that the user wants wishes to a file.
2. The feature supports saving and restoring static IP address.
'Registry' Tab – This tab provides the option to the user to update values to keys in the device registry and save
these records to the file so that the stored values can be restored to the corresponding keys, on the same QP+ at a
later time, or if needed also on a different QP+.
100 GFK-2847W
For public disclosure
QuickPanel⁺ Operator Interface User
Manual