Vesa Arm Mounting - GE QuickPanel+ IC755CxS06RDx User Manual

5.5

VESA Arm Mounting

The QuickPanel unit can be installed on a commercially available Video Electronics Standards Association (VESA) MIS-D
+
arm, stand, or apparatus that complies with the UL1678 standard.
Note Refer to the mounting arm manual for instructions.
➢ To VESA mount the QuickPanel
following figures).
The mounting holes for IC755CxS06RDx and IC755CxW07CDx attach with M4 screws that are 6 mm (0.24 in) or less in
length.
The mounting holes for IC755CxSxxCDx attach with M4 screws that are 8 mm (0.32 in) or less in length.
Display Unit
IC755CxS06RDx
IC755CxW07CDx
IC755CxSxxCDx
68 GFK-2847W
For public disclosure
unit: use the mounting holes located on the back of the unit (displayed in the
+
Torque Range for Mounting M4 Screws
Torque Range
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
75 mm
(2.95 in)
m
m
5
7
IC755CxW07CDx or IC755CxS06RDx VESA Mounting Holes
100 mm
IC755CxSxxCDx VESA Mounting Holes
75 mm
(3.94 in)
QuickPanel⁺ Operator Interface User
Manual