Installation; Receiving Inspection; Jumper Settings - GE Bently Nevada 1900/27 Operation And Maintenance Manual

1900/27 Vibration Monitor Operation and Maintenance Manual
This section describes how to install the 1900/27 Vibration Monitor. It includes
information on how to configure the monitor for your particular application using
the monitor's internal jumpers and the configuration switches on the front panel.
This section also describes how to connect the Accelerometer to the 1900/27
Vibration Monitor.

2.1 Receiving Inspection

Inspect the components of the order as soon as you receive them to see if there
was any damage during shipment. Keep all shipping forms and invoices. If any
shipping damage is apparent, file a claim with the carrier and submit a copy to
Bently Nevada Corporation. Include all model numbers and serial numbers with
the claim. We will either repair or replace damaged parts according to the terms
and conditions of the sale.
A plastic cover will be over the display when the monitor is shipped from Bently
Nevada. Remove the cover from the label either when you receive the monitors or
during installation.

2.2 Jumper Settings

Use internal jumpers to program each relay as latching or non-latching and
normally energized or de-energized. Use the Bypass Mode jumper to program
what 4 to 20 mA interface does during relay bypass.
6

2. Installation