GE QuickPanel+ IC755CxS06RDx User Manual page 77

5.7.2.2 IP Address Setting
The QuickPanel Operator Interface provides two methods to set an IP address:
+
• DHCP (Dynamic Host Configuration Protocol)
The network server assigns an IP address during QuickPanel
connected network for a valid IP address to be assigned. Contact your network administrator to ensure correct
DHCP
server configuration.
• Manual Method
Specify the numeric addresses obtained from your network administrator for the QuickPanel
Mask and Default Gateway (if applicable).
Note Run the Backup utility
Mounting and Installation
For public disclosure
to save the settings.
initialization. There must be a DHCP server on the
+
IP Address, Subnet
+
GFK-2847W 77