Data Types Mapping Between Pme Project And Snmp; Establish Snmp Communication - GE QuickPanel+ IC755CxS06RDx User Manual

3.14.5

Data Types Mapping between PME Project and SNMP

When you configure HMI tags in a PME project and you would like to use them in SNMP communication, all of the HMI
tags are mapped to the corresponding data type in SNMP as listed in the following table. To verify this, review the
Sequence of HMI Tags object in the MIB file.
PME VIEW Data Types
Note The PME VIEW LREAL data type is mapped to DISPLAYSTRING to retain the data intact.
You can continue to use the data type override/suffix mechanism in PME for the LREAL data type to represent a INT/DINT
if you have configured the data type for driver variables. This enables you to map to the DISPLAYSTRING data type in the
SNMP communication as well.
For example, for the GE SRTP driver, you can override the IO Address of LREAL variable LREALVar data type as %R100
[INT]. This maps LREALVar to DISPLAYSTRING in the MIB file.
3.14.6

Establish SNMP Communication

Attention
➢ To establish SNMP communication with the QuickPanel
1. Download the Project to the network connected QuickPanel
2. Configure the Trap Destinations
Note If you do not want to be notified of Traps, you do not need to configure Trap Destinations.
3. Enable a SNMP
4. Export the MIB
5. Auto-discover or connect the QuickPanel
SNMP Manager tool.
The SNMP Manager communicating with QuickPanel
Alarms/Trap notification from the QuickPanel
Tip � If you get out of sequence in the steps for configuring Traps and starting the SNMP service to establish the SNMP
communication, enable or disable
52 GFK-2847W
For public disclosure
BOOL
DINT
LREAL
STRING
SNMP communication requires that both the QuickPanel
Manager running on a machine are connected on a valid Ethernet network.
with the IP Address of the SNMP Manager.
Agent.
to a SD Card.
+
+
the SNMP Agent again using the QuickPanel
device
+
device and start Runtime.
+
SNMP Agent from the SNMP Manager. Once connected,
device can query values for HMI Tags and receive
+
device operating as a SNMP Agent.
QuickPanel⁺ Operator Interface User
Manual
SNMP Data Types
INTEGER
INTEGER
DISPLAYSTRING
DISPLAYSTRING
device and the SNMP
+
load the MIB
OS Utilities Setting tool.
+
to the