Connectors; Power Connector Pin-Out For Ic755Cxs06Rdx, Ic755Cxw07Cdx, And Ic755Cxsxxcdx; Ethernet For Ic755Cxs06Rdx, Ic755Cxw07Cdx, And Ic755Cxsxxcdx - GE QuickPanel+ IC755CxS06RDx User Manual

5.7

Connectors

5.7.1 Power Connector Pin-out for IC755CxS06RDx, IC755CxW07CDx, and
IC755CxSxxCDx
Note Refer to the section Connecting Input
Connector: Terminal Euro (Tyco Electronics 284539-3)
Mating Connector: (Tyco Electronics 284510-3)
Pin # Signal Name
+24 V dc
1
2
3
IC755CxSxxCDx supports both +12 V dc or +24 V dc IN
†
5.7.2

Ethernet for IC755CxS06RDx, IC755CxW07CDx, and IC755CxSxxCDx

Note Refer to the section Ethernet Port LED
The QuickPanel display is equipped with 10Base-T/100-Base-TX Ethernet port(s). Connect an Ethernet network cable
+
(unshielded-twisted pair, CAT 5) to the unit through the RJ-45 connector(s) on the bottom of the enclosure. LED indicators
on the port indicate channel status. The port can be accessed by Windows Embedded Compact 7 network
communications or by your application.
5.7.2.1 Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Signal Name
Pin #
1
2
3
4
5
6
7
8
Note Dual Ethernet ports are separate ports (only applicable to QuickPanel
76 GFK-2847W
For public disclosure
Power.
†
GND
FG
Operation.
TX+
TX-
RX+
NC
NC
RX-
NC
NC
Pin-out
1 3
Pin-out
Yellow Green
8 1
IC755CxSxxCDx 10, 12, and 15" display units)
+
QuickPanel⁺ Operator Interface User
Manual