Table of Contents
Advertisement
Thank you for purchasing an AEMC
For best results from your instrument and for your safety, read the enclosed operating instruc-
tions carefully and comply with the precautions for use. These products must be only used by
qualified and trained users.
WARNING, risk of DANGER! The operator must refer to these
instructions whenever this danger symbol appears.
CAUTION! Risk of electric shock. The voltage at the
parts marked with this symbol may be dangerous.
Equipment is protected by double insulation.
USB socket.
SD Card.
Ground/Earth.
Important instructions to read and to fully understand.
Useful information or hint to read.
The CE marking guarantees conformity with European directives and with
regulations covering EMC.
The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.
Definition of Measurement Categories (CAT)
CAT IV
Measurement category IV corresponds to measurements taken at the source of low-
voltage installations.
Example: power feeders, counters and protection devices.
CAT III
Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
CAT II
Measurement category II corresponds to measurements taken on circuits directly
connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
Shop for AEMC products online at:
PowerPad
III Model 8435
®
®
ShopAEMC
www.
.ca
1.800.561.8187
Advertisement
Table of Contents
