Servicing; Annual Servicing; Changing Components - gledhill benchmark BoilerMate A-Class OV Series Design, Installation And Servicing Instructions

An open vented central heating and mains pressure hot water supply system
Table of Contents

Advertisement

3.0 SERVICING

3.1 ANNUAL SERVICING

No annual servicing of the BoilerMate A-Class
is necessary.
However, if required, the operation of the
controls and a hot water performance test can
be carried out when servicing the boiler to
prove the appliance is working satisfactorily
and within its specification.
3.2 CHANGING
COMPONENTS
Free of charge replacements for any faulty
components are available from Gledhill during
the in-warranty period (normally 12 months).
After this, spares can be obtained direct from
Gledhill using the 'Speed Spares' service, or
through any of the larger plumbers merchants/
specialist heating spares suppliers.
Help and advice is also available from the
Technical Helpline on 01253 474401.
However,all components are readily accessible
and can be changed quickly and easily by the
installer using common plumbing practice.
Note:
The PHE pump is a Grundfos UPR 4 wire
type and any replacement must be the
same model.
This type of pump is also available as an option
for the boiler and heating pumps. Be sure to
check this and replace on a like for like basis.
Page 34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents