A combined primary storage unit (cpsu) for domestic hot water supply and central heating
appliance category 1 2h
types c13:c53:c33
destination gb: ie, nox class 5 (52 pages)
Summary of Contents for gledhill BoilerMate HP-DEM-A
Page 1
User Instructions In the interest of continuously improving the BoilerMate A-Class range Gledhill Building Products Ltd reserve the right to modify the product without notice and in these circumstances this booklet, which is accurate at the time of printing, should be disregarded.
Page 2
This unique combination of the Mitsubishi Ecodan air source heat pump boiler and Gledhill BoilerMate will provide a carbon saving of up to 40% compared to a gas condensing boiler. As such, it represents the very latest technology to reduce...
Page 3
The Gledhill BoilerMate offers several major Boilermate A-class HP-DEM-A advantages: It controls the operation of the air source heat pump boiler to ensure it only operates when needed to provide heat for your hot water or central heating. It controls the heat up of your property...
Page 4
Because the air source heat pump boiler is controlled by the BoilerMate, it will operate only when needed to maintain the optimum temperature both for the hot water tank and space heating circuits. There is no need to adjust the outside air source heat pump boiler.
Page 5
How Does The System Deliver Water The water to the taps and showers in your home is delivered at high pressure because At High Pressure? it uses the mains pressure of your cold water supply. Because it is so effi cient, both high fl ow rates and high pressures are available to give the best performance for both baths and showers.
Page 6
Controlling Your BoilerMate A-Class HP-DEM-A Your BoilerMate is highly advanced and incorporates the latest in microprocessor technology to monitor your system automatically and ensure it operates at maximum efficiency. This includes periodically ‘spinning’ the heating pump to prevent seizing during prolonged unused heating periods.
Page 7
Using The Unique ‘Switch’ Emergency Your BoilerMate A-Class HP-DEM-A is fi tted with Gledhill’s unique ‘SWITCH’ emergency Electrical Back-up System electrical back-up system. You have an instant failsafe should your air source heat pump boiler cease to operate. If you believe the boiler has stopped working and you are unable to restore heating and hot water activate ‘Switch’...
Page 8
The front panel user controls are shown in Front Panel Controls the picture below and their functions are described opposite. Four different windows can be displayed in the visual display panel on the front of the appliance. Page 8...
Page 9
Normal Operating Display Window BoilerMate-HP-DEM In normal automatic operation the display will be as shown opposite. Mode Normal Normal operating display Switch Operating Display Window BoilerMate-HP-DEM If a fault occurs with the heat pump, the ‘Switch’ emergency electric back-up system Mode Switch can be selected by pressing and holding...
Page 10
Press the ‘Reset’ key with a pencil or similar object to adjust any values or enter the preset programs. Press the ‘Menu’ key to adjust/review any existing values or enter your own programs. 24h or am/pm Overview of setting daily switching programme Weekday Summer/winter...
Page 11
Setting Switching Times Digital Timeswitch The timeclock fi tted to the appliance has This timeclock allows you to use 3 preset 2 channels which allows separate time programs, modify these or set your own control of the hot water charge time and programs.
Page 12
the time and day in line with the ‘Setting The Time’ procedures for each switching required ie. on and off. Set the channel you wish to be switched using the + or - adjustment keys and press the OK button to confi rm. Channel 1 is for the hot water time settings.