gledhill benchmark BoilerMate A-Class OV Series Design, Installation And Servicing Instructions page 27

WARNING
: THE BOILERMATE A-CLASS IS FITTED WITH AN ELECTRIC
BACKUP SYSTEM 'SWITCH' .
IMPORTANT
: ELECTRICIAN/INSTALLER PLEASE NOTE.
THE 2 x 16A MCB's (MCB1 and MCB2) FOR THE 'SWITCH' ELECTRIC BACKUP
SYSTEM ARE SUPPLIED SET IN 'OFF' POSITION. THE GAS BOILER CAN BE
COMMISSIONED WITHOUT SWITCHING THESE ON.
IT IS IMPORTANT THAT THE GAS BOILER IS COMMISSIONED BEFORE TESTING
OR USING EMERGENCY SWITCH FACILITY.
AFTER THE GAS BOILER HAS BEEN COMMISSIONED CUT AND REMOVE THE
PLASTIC TIE AND MOVE THE MCB'S TO 'ON' POSITION TO COMMISSION THE
SWITCH FACILITY.
������� ������ ����������
���� ��� ����� ��� ������� �������
������� �������
����������
������ ���������
�� � � �
� �
���� ���� ������
������ ������ ���������
����� �������� �� �������
������� �������� ������ �� � �������� ���������� ���� ��������
2.0 INSTALLATION
2.2 INSTALLATION
Electrical Power Supplies - BoilerMate
A-Class with Switch.
� �
������ ����
��������
������ � ������
�� ���������
Page 27
��� � ��� �
��� �
�� �� ��
��� ��� ���
�� � � �
�� �
� � � �
��������� ����� ������
���� ����� ����� �� ������
��� ����� �� ���
�
����� ���� �����