DETEWE OpenPhone 63 User Manual page 46

You can thus configure instant for-
warding of external calls to one
number, and at the same time after
delay forwarding of internal calls to
a different number.
When configuring the system, the
system administrator specifies after
how many seconds a call is for-
warded in the After delay for-
warding mode. If more than one for-
warding mode has been activated,
Instant is given priority.
Note: All calls for the telephone
numbers of your terminal are for-
warded (with the exception of hunt
group numbers). If a number is stored
on more than one terminal, then calls
made to any of the other terminals
will be forwarded as well.
1ƒDivert phone: Select
Immediately, After delay or
Busy for the forwarding mode. Then
key in the destination (Dest.:).
After selecting Internal calls,
you can determine whether
Internal calls, External
calls or Int./ext.calls are
forwarded to the destination
(Dest.:). Activate the function
with On. For external destinations
you must always enter
(
Internal telephone numbers are
entered without any line seizure
digit.
42
Main Menu
in the United Kingdom).
2ƒDivert key: From the list,
select the key to which the internal
telephone number that is to be for-
warded has been assigned. Select
Immediately, Busy or After
delay for the forwarding mode.
Then key in the destination
(Dest.:). After selecting
Internal calls, you can deter-
mine whether Internal calls,
External calls or Int./ext.
calls are forwarded to the destina-
tion (Dest.:). Activate the function
with On. For external destinations
you must always enter
(
ternal telephone numbers are en-
tered without any line seizure digit.
3ƒFollowƒme: This call forwarding
mode is configured on a destination
terminal to to which calls for an orig-
inal (source) terminal are forwarded.
The terminal PIN of the source tele-
phone is required for this function
(see Seite 44). On the destination
terminal, select 3 Follow me from
the MenuCard "Call forwarding" . As
the Source, enter the internal tele-
phone number for which calls are to
be forwarded from the source termi-
nal to the destination terminal. Then
enter the PIN: of the source. Switch
first
the follow me function on or off with
On / Off.
On the other telephone (source),
you can deactivate the follow me
function by switching off Divert
phone.
in the United Kingdom). In-
Features and MenuCards
first