28.12 Softener Regeneration; 28.13 Display Of The Counters - Wega Wegaconcept Use And Maintenance Manual

Wegaconcept

28.12 Softener regeneration

To automatically display the message indicating the
need to regenerate the softener, proceed as follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)
Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Confirm to access the menu
RIGENER. SOFTENER
Set the number of litres used by the machine after
which the message indicating the need for regenera-
tion will be shown
ENTER Confirm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
To exit the programming menu
i
Once the set number of litres is reached, to eliminate
the signal on the display see chapter 32. To cancel the
signal set the litres to "000000".
46
XXXXX

28.13 Display of the counters

This menu item allows to view a variety of information,
useful to the technician for the proper identification of
anomalies.
It also provides a valuable tool to the user when
carrying out scheduled maintenance.
Below is the list of screens in this menu with a brief
description.
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)
Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Confirm to access the menu
TOTAL COFFEES
The first screen shows the number of total coffee selec-
tions made by the machine.
To display the partial strokes for the various types of
delivery, press the respective keys on the push-button
panel. The selected key will light up, and the number of
selections made will be displayed.
You can repeat this operation for every dose key.
COUNTERS
Press ( ), to view the alarm list.
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
This screen shows the last 8 alarms stored by the ma-
chine. For further information, refer to chapter 30
Press ( ), to view the scheduled maintenance.
XXXXX
XXXXX
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
XX - DDMMYY
Technical manual