Messages Via E-Mail - Siemens OZW672 Series Commissioning Instructions

E-mail
76 / 102
Siemens
Building Technologies
5.2

Messages via e-mail

SMTP is used to send fault messages and system reports via email. The mail
server (SMTP server, out-going mail server) must be known to the web server
to send e-mails to the receivers.
The following applies to send e-mails via the Internet:
• An e-mail account is available and set up.
• Internet access is set up for the web server (see Section 5.1.2).
• The settings for "E-mail", "Message receiver 1...4", "System report"
(see Section 2.5.2).
Example mail:
Web server
Communications
CE1C5712en
06.06.2011