Advertisement
Output power (energy storage) connection
Voltage (U
)
2
Current
Converter module output
terminals
Maximum energy storage
cable length
Control accuracy – Current and voltage control
performance data
Current control dynamic
response
Current control accuracy
(static)
Energy storage voltage
control accuracy (static)
Control unit connection data
See
Control units of the
Coolant connections
Tube fitting, quick coupler for 16/13 mm polyamide (PA) pipe.
Optical components
The specifications of the optic cable are as follows:
•
Storage temperature: -55 ... +85 °C
•
Installation temperature: -20 ... +70 °C
•
Maximum short-term tensile force: 50 N
•
Minimum short-term bend radius: 25 mm
•
Minimum long-term bend radius: 35 mm
•
Maximum long-term tensile load: 1 N
•
Flexing: Max. 1000 cycles
ABB drive products in general utilize 5 and 10 MBd (megabaud) optical components from
Avago Technologies' Versatile Link range. Note that the optical component type is not
directly related to the actual communication speed.
ACS880-1604LC-xxxxx-7 = Maximum output voltage 150 V...95% of U
DC voltage in the DC bus). This is indicated in the type designation label as typical
output voltage range 50...668 / 764 / 878 V DC (764 V DC for UL/CSA).
Recommended output voltage 150 V...80% of U
See section Ratings.
See the dimension drawings. Note that frame R8i module has a quick connector.
100 m (328 ft)
Step response time < 10 ms for a reference step 0% to 50% of the drive nominal
current
Current error < 1% of the drive nominal current rating
For the DC current ripple, see
Voltage error < 1% of the drive nominal voltage (converter with the optional BAMU
voltage/current measurement unit)
Note:
If the converter does not include the BAMU voltage/current measurement unit, the
voltage measurement accuracy depends on the customer's measurement device.
drive.
.
DC
Ratings (page
126).
Technical data 133
(Drive
DC
Advertisement
