Installation - Danfoss AME 110 NL Datasheet

Data sheet
Technical data

Installation

2
Actuators for modulating control AME 110 NL, AME 120 NL
Type
running
standby
Control input Y
Closing force
Relative humidity
Max. medium temperature
Ambient temperature
Weight
standards
* 24V AC; +10% to −15% if produced before w18y2013
Mechanical
The actuator should be mounted with the valve
stem in either horizontal position or pointing
upwards.
The actuator is fixed to the valve body by means
mounting. The ring should be tightened by hand.
Electrical
Important: It is strongly recommended that the
mechanical installation is completed before the
electrical installation.
Auto sleep mode
supply voltage and if it is not installed on
AB-QM valve, it will stop in lower position and
2. It is mandatory to drive the spindle of the
actuator to upper position before it will be
installed on AB-QM valve (please refer to
manual override drawings)!
power supply
Each actuator is supplied with the connecting
cable for the controller.
VD.KH.C6.02 © Danfoss 01/2014
AME 110 NL
V
VA
W
V
mA
N
mm
s/mm 24
°C
III safety extra-low voltage
AME 120 NL
24 AC; +20 to −15% *
2
0,5
50/60
130
5
12
max. 80 %
120
0 ... 55
–40 ... 70
0,3
SMT/SI