Danfoss AME 110 NL Datasheet

Actuators for modulating control

Hide thumbs Also See for AME 110 NL:

Operating manual (24 pages)

Datasheet (8 pages)

Operating manual (4 pages)

page of 8

/ 8
Bookmarks

Quick Links

Download this manual

Data sheet

Actuators for modulating control

AME 110 NL, AME 120 NL

Description

Ordering

SMT/SI

Supply voltage

Type

(V)

24 AC

Note:

Actuators with 5 m and 10 m cable length are produced on request. Please note this increases lead time.

Spare parts

Length

Type

(m)

Cable (24 V)

VD.KH.C6.02 © Danfoss 01/2014

The actuators are used together with

automatically balanced combination valve type

AB-QM for DN 10-32.

The actuator can be used with fan coil units,

induction units, small reheaters, recoolers and

zone applications in which hot/cold water is the

controlled medium.

Main data:

prevents overload of actuator and valve

Speed

Cable length

(s/mm)

(m)

1,5

5,0

1,5

5,0

Code No.

082H8052

082H8054

Code No,

082H8057

082H8067

082H8081

082H8077

082H8098

082H8087

082H8059

082H8079

082H8089

Need help?

Do you have a question about the AME 110 NL and is the answer not in the manual?

Questions and answers

Summary of Contents for Danfoss AME 110 NL

Page 1 Data sheet Actuators for modulating control AME 110 NL, AME 120 NL Description The actuators are used together with automatically balanced combination valve type AB-QM for DN 10-32. The actuator can be used with fan coil units, induction units, small reheaters, recoolers and zone applications in which hot/cold water is the controlled medium.
Page 2: Installation
Data sheet Actuators for modulating control AME 110 NL, AME 120 NL Technical data Type AME 110 NL AME 120 NL 24 AC; +20 to −15% * running standby 50/60 Control input Y Closing force s/mm Relative humidity max. 80 % Max.
Page 3 Data sheet Actuators for modulating control AME 110 NL, AME 120 NL Installation procedure position in stem up position (factory setting). indicator Ensure that the actuator is mounted securely on the valve body 2. Wire the actuator according to the wiring diagram 3.
Page 4 Data sheet Actuators for modulating control AME 110 NL, AME 120 NL DIP Switch Setting 0-5/5-10 V - Input signal range in (for service purposes only) under the removable cover. sequential mode -5(6) V or 0(4)-10(12) mA. If set to ON position, the U/I - Input signal type selector 5(6)-10 V or 10(12)-20 mA.
Page 5 Data sheet Actuators for modulating control AME 110 NL, AME 120 NL Manual override (for service purposes only) Caution: Do not manually operate the ② drive if power is connected! ① Do not dismount the actuator from the valve when it is in a...
Page 8 Data sheet Actuators for modulating control AME 110 NL, AME 120 NL VD.KH.C6.02 Produced by Danfoss A/S © 01/2014...

This manual is also suitable for:

Ame 120 nl