Table of Contents
Advertisement
Chapter 2: Hardware Overview
StorNext M330 Connectivity
StorNext M330 SAS
Cabling
Figure 12 StorNext M330 SAS
Cabling
MDC Node 1
Metadata Array
Port 1
Port 2
MDC Node 2
StorNext M330 LAN
Cabling
26
Connect the Serial Attached SCSI (SAS) ports cables between the nodes
and the Metadata Array as shown in
Lnk
ID/Diag
The number of customer-facing network ports depends on the model
type. Each MDC node also contains an iDRAC port and a dedicated
service port. By default, each StorNext M330 model ships with one
bonded network interface: Bond 0. All ports, excluding the service and
iDRAC ports, are customer-configurable. Instructions for changing the
Lnk
Port 1
Port 2
StorNext M330 Metadata Appliance Hardware Guide
Figure
12.
ID/Diag
Lnk
Lnk
Advertisement
Table of Contents
