Table of Contents
Advertisement
Table 2 StorNext M330 MDC
Node – Hard-Drive Activity and
Status Indicators
Drive-Status Indicator Pattern
(RAID Only)
Blinks green two times per second
Off
Blinks green, amber, and off
Blinks amber four times per second
Blinks green slowly
Steady green
StorNext M330 Metadata Appliance Hardware Guide
Condition
Identify drive/preparing for removal.
Drive ready for insertion or removal.
Note: When system power is applied, the drive status
indicator remains off until all hard drives are
initialized. Drives are not ready for insertion or
removal during this time.
Predicted drive failure.
Drive failed
Drive rebuilding
Drive online
MDC Node - Rear View
The back of each StorNext M330 MDC Node has a series of indicators,
connectors, and buttons. Unlabeled indicators, connectors, and buttons
are reserved for Quantum Service.
Figure 4
shows the rear indicators, connectors, and buttons of the
system.
Chapter 2: Hardware Overview
StorNext M330 Components
13
Advertisement
Table of Contents
