Connecting To Weld Output Terminals - Miller Bobcat 250 Diesel Owner's Manual

5-8. Connecting To Weld Output Terminals

1
6
3
4
5
Notes
.
Complete Parts List is available at www.MillerWelds.com
2
Tools Needed:
3/4 in.
!
Stop engine.
!
Failure to properly connect
weld cables may cause ex-
cessive heat and start a fire,
or damage your machine.
.
Do not place anything between
weld cable terminal and copper
bar. Make sure that the sur-
faces of the weld cable terminal
and copper bar are clean.
1 Correct Weld Cable
Connection
2 Incorrect Weld Cable
Connection
3 Weld Output Terminal
4 Supplied Weld Output
Terminal Nut
5 Weld Cable Terminal
6 Copper Bar
Remove supplied nut from weld
output terminal. Slide weld cable
terminal onto weld output terminal
and secure with nut so that weld
cable terminal is tight against cop-
per bar.
803 778-B
OM-258413 Page 27