Do not use extension cord. Do not allow a magnet near screens. Do not clean with pressure washer. Do not allow water to be splashed or poured on front, sides, top, or back. Cecilware ® Radiance Grindmaster Connect ™ Manual...
Page 3
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Notice: Any changes or modifications not expressly approved by the Grindmaster-Cecilware could void the user's authority to operate the equipment.
Page 4
(only on A, BW, and CW units) USB to Main Control Board Reset Button on Main Control Board Status LED’s on Main Control Board HDMI to Wi-Fi Board (only on BW and CW units) Cecilware ® Radiance Grindmaster Connect ™ Manual...
Page 5
Control Board Status LED’s on Primary Status LED’s on Control Board Secondary Control Board HDMI to Wi-Fi Board (only on BW and CW units) USB to Prime Control Board USB to Secondary Control Board Radiance Grindmaster Connect ™ Manual Cecilware ®...
Page 6
Settings icon. Contact our customer service department for your Username and Password. If you need help, call Grindmaster-Cecilware Technical 4. Ensure Wi-Fi is “ON”. If not, set switch to “ON”. Service Department, (502) 425-4776 or (800) 695-4500 (USA &...
Page 7
After you made your configuration changes, press “Save and Return” to view the results. Radiance Grindmaster Connect ™ Manual Cecilware ®...
Page 8
Below is an example of a configured Dashboard. If you need help, call Grindmaster-Cecilware Technical Service Department, (502) 425-4776 or (800) 695-4500 (USA & Canada only) (Monday through Friday 8 AM - 6 PM EST). Please have the model and serial number ready so that accurate information can be given.
Need help?
Do you have a question about the Radiance 5A and is the answer not in the manual?
Questions and answers