Pavone Systems MCT 1302 Technical Manual page 72

1502 Analog tare (LSW)
1503 Analog full scale (MSW)
1504 Analog full scale (LSW)
1505 Analog output mode
1506 Analog output range
1507 Analog zero adjustment
1508 Analog full scale adjustment
2000 Monitor register
2100 Monitor register
TABLE A - CODING THE STATUS REGISTER
BITS 15
Description Setup (***)
BITS 7
Not
Description
calibrated
TABLE B - CODING THE INTERNAL DIGITAL INPUTS/OUTPUTS OF MCT 1302
BITS 15÷6
Description Reserved
WARNING: bits 15 to 4 are not managed and always are equal to 0.
Page 70
R/W Value INT. - Less significant word
R/W Value INT. - Most significant word
R/W Value INT. - Less significant word
R/W See match on page 35
R/W See match on page 35
R/W
R/W
W
R
14 13 12
Weight
0 0
delta
6 5
Weight
Overload
error
5 4
In 6 - Out 6 In 5 - Out 5
ON ON
Value INT. Points of zero of the analog output; to end
the adjustment procedure it is necessary to send the
command to save data in permanent memory in the
Command Register.
Value INT. Points of full scale of the analog output; to
end the adjustment procedure it is necessary to send
the command to save data in permanent memory in the
Command Register.
The programmed value is automatically copied to the
Monitor Register (2100).
11 10
0= Net displayed
0
1= Gross displayed
4 3
Under- Tare
load entered
3 2
In 4 - Out 4 In 3 - Out 3
ON ON
9
Run backup
2 1
Zero Stable Zero
band weight center
1
In 2 - Out 2 In 1 - Out 1
ON ON
8
0
0
0