Main Screen - Pavone Systems MCT 1302 Technical Manual

From this screen it is possible to access all the operational and programming functions of the instrument,
following the indicated commands.
Date
Batching cycles
Recipe correction
factor
F1 Operation key
The display mode of the main screen can be selected using the appropriate parameter in the "Opera-
ting Mode" menu:
• "Standard" main screen, in which all the quadrants are displayed (weight, recipe selection, cycle
setting, set correction factor setting, batching information).
• Main screen "weight only", in which only the weight dial is displayed. In this case the weight value
is displayed with a larger size than the standard display. Moreover, in case of batch in progress,
a bargraph is displayed, which represents the net weight batched in relation to the set value.
The "weight only" main screen is activated under the following conditions:
• After 5 seconds from switching on the instrument.
• After 5 seconds from the start of the batch.
To temporarily restore the "standard" main screen, press on the weight value. After 5 seconds the
"weight only" main screen appears again.
The functions of the operation keys (F1, F2, F3 and F4) can be programmed using the appropriate
parameters in the "Operating Mode" menu.
All the keys on the main screen can be locked using the appropriate parameters in the "Operating
Mode" menu.
F1 Operation key

MAIN SCREEN

F2 Operation key
F2 Operation key
F3 Operation key
Menu key
F3 Operation key
Menu key
Time
Weight quadrant
Recipe
quadrant
F4 Operation key
Weight quadrant
F4 Operation key
Page 17