Pavone Systems MCT 1302 Technical Manual page 39

Output associated with the end of
a batching cycle. "NA" operating
logic, it is activated at the end of
the last phase of the batching cycle
and remains ON for the cycle end
time (settable parameter). In the
case of a parameter set to 0, no
output is associated.
This output activates in an alarm
condition ("NA" operating logic). In
the case of a parameter set to 0, no
output is associated.
This parameter allows to select the
unit of measurement of the time for
the TIMER activity.
Value in seconds that indicates how
long it should be kept the STOP
command (both from touchscreen
that by logic input) to ensure that
the batching is interrupted.
Autotare execution selection at the
beginning of the batching.
Automatic print selection at the end
of each batching cycle.
0 0÷32
0 0÷32
[0] SECONDS
0
[1] MINUTES
3 0.0 ÷ 10.0
[0] OFF
OFF
[1] ON
[0] OFF
OFF
[1] ON
0118
0119
0120
0121
0151
0152
Page 37