SMC Networks ITV2000 Easy Programming Manual page 4

P T S
ROGRAMMING HE
3C
When setting the minimum pressure and maximum pressure values, the new values take
:
AUTION
effect as soon as the SET key is pressed. Use caution to avoid damage or injury.
1. U
NLOCK THE KEYPAD
•
Press and hold the down key for 2 seconds or longer. The display will blink L
•
Press the set key to unlock the keys.
•
Press the SET key to continue to the next step.
2. S
ET THE MINIMUM PRESSURE
•
Press the UP and DOWN keys until the display shows the desired minimum pressure.
•
Press and release the SET key to continue to the next step.
3. S
ET THE MAXIMUM PRESSURE
•
Press the UP and DOWN keys until the display shows the desired maximum
pressure.
•
Press and release the SET key to continue to the next step.
4. S
ET THE MONITOR PRESSURE
•
Press the UP and DOWN keys until the display shows the desired monitor pressure.
•
Press and release the SET key to continue to the next step.
5. S
ET THE MONITOR PRESSURE
•
Press the UP and DOWN keys until the display shows the desired monitor pressure.
•
Press and release the SET key to finish the setup.
•
The display returns to the current pressure.
Microprocessor-Controlled Electro-Pneumatic Regulator
E A S Y P R O G R A M M I N G G U I D E
-P
ET OINTS
(F_1)
(F_2)
(P_1)
(P_2)
ITV2000
.
OC
Page 4
last updated 11/03/03 10:05 AM