Table of Contents
Advertisement
3.5 Logging Printing
Numeric values are printed with the channels in columns and the times in rows in the form of
CSV data. The maximum, minimum, and average values are printed in the last row. The print
direction is different between direct logging and memory out logging.
During direct logging
Direct logging printing is only supported on the GL240 and GL840. Direct logging printing is
performed when data is printed with the screen mode set to digital display. The fastest print
sampling speed is 1 second. Decimation is performed at data sampling settings faster than 1
second. Logic nor pulse signals cannot be printed.
On the GL840, the channel set on the information channel is printed. For the information
channel setting, see "Information channel setting" in chapter 4, "Configuration."
A "T" mark is printed next to the time in the row in which a trigger occurs. Moreover, an "A"
mark is printed in the channel of the row in which an alarm occurs.
※ If Trigger Sync is set to off and the sampling interval is set slower than 30 seconds, the
sampling interval will be offset near the start trigger because trigger detection is
performed at 30-second intervals.
17
Advertisement
Table of Contents
