Trigger Sync; Print Timing - GRAPHTEC DP-581H Function Manual

Trigger Sync

You can turn on or off the Trigger Sync mode. For details on the print timing, see the next
section (Print timing).
Options
Off
On

Print timing

 Print timing during Y-T recording
The print timing varies depending on the Trigger Sync setting. The following figure shows the
timings.
Start trigger only
●
When Trigger Sync is set to off, printing is performed during the period from when recording is
started until it is stopped. When Trigger Sync is set to on, printing is performed during the
period from when the trigger condition is established until recording is stopped.
Even if recording stops in the middle the recording due to the disk or memory becoming full,
printing continues until you stop it. If stop trigger is specified when recording to internal RAM
(GL980/GL2000 only), see "Memory full (internal RAM)" under "In the case of start/stop
trigger."
24
Description
Printing is not synchronized to the trigger function. Printing starts
when recording starts.
Printing is performed in sync with sugar start and trigger stop.