Wired Lan Connection; Required Items; Connection Procedure - GRAPHTEC DP-581H Function Manual

Wired LAN connection

To use a wired LAN connection, you need an off-the-shelf wireless LAN router. Obtain it in
advance. Make sure that the off-the-shelf wireless LAN router meets the following
specifications.
IEEE802.11n compatible

Has a wired LAN port

Has a router mode (RT mode)

※ Graphtec will not guarantee the operation of the off-the-shelf wireless LAN router or answer
any questions about it.

Required items

DP-581H printer

GL840 or GL980/GL2000 midi LOGGER

Off-the-shelf wireless LAN router

Remote Network Driver Interface Specification (RNDIS) driver

* A PC driver for making a Web connection to the printer
USB cable (Type-A to Type-C) for connecting the printer to the PC

LAN cable for connecting the logger to the wireless LAN router

Windows PC (Windows 7, Windows 8/8.1, Windows 10)


Connection procedure

1. Off-the-shelf wireless LAN router configuration
1-1. Set the router to router mode.
For the procedure to change the mode, see the instruction manual for the wireless LAN
router.
2. Logger configuration
2-1. Connect the off-the-shelf wireless LAN host to the logger using a LAN cable.
2-2. Turn the logger on.
2-3. Press the MENU key on the logger to open the I/F menu.
2-4. Set the network addresses according to the off-the-shelf wireless LAN router settings.
Normally, an off-the-shelf wireless LAN router has an auto network address assignment
function (DHCP), so you can set the "Auto IP address assignment" of the logger to
"Enabled" to automatically obtain the addresses. If the DHCP on the wireless LAN router
is disabled, set the "Auto IP address assignment" of the logger to "Disabled" and set the
addresses.
11