Table of Contents
Advertisement
In the case of start/stop trigger
In the case of start/stop trigger, the start timing is same as the start trigger. The stop key or
stop trigger stops not only the recording but also the printing. The following is a description of
what happens when the disk or memory becomes full.
<Disk full (extra memory, internal memory)>
If an external memory or internal memory is used, printing continues until the start key is
pressed or a stop trigger is received even if the recording stops due to the disk becoming full
between start and stop. During this period, the measuring instrument status shows that data
has been recorded.
<Memory full (internal RAM GL980/GL2000 only)>
If the recording destination is set to internal RAM and recording stops due to the memory
becoming full, printing also stops. Note that printing stops before the stop trigger point. This is
due to a limitation of the instrument.
25
Advertisement
Table of Contents
