Channel Marks; Alarm Printing - GRAPHTEC DP-581H Function Manual

Channel marks

This function prints channel numbers above the Y-T waveform. They are printed only on
channels whose amp setting is enabled.
Parameter
Off
On
 Print example

Alarm printing

This is printed when an alarm occurs. If alarms overlap, the alarm printing in progress is
canceled, and the printing of the alarm that occurred later overwrites the printing of the older
alarm. If alarms occur on multiple channels simultaneously, printing is performed only for the
channel with the smallest channel number. Further, the ▲ mark is replaced with an overlap
mark.
Parameter
Off
On
 Print example
36
Description
Channel marks are not printed.
Channel marks are printed.
Description
Alarm printing is not performed.
Alarm printing is performed.