Capter 2 Preparation; Usb Connection; Required Items; Connection Procedure - GRAPHTEC DP-581H Function Manual

CAPTER 2 Preparation

This chapter explains the procedure to connect a printer to the midi LOGGER series. For the
preparation of the printer itself, see the instruction manual or setup guide for the printer. The
method of connecting a midi LOGGER series and printer varies depending on the interface that
you will use.

USB connection

Connect the printer to the logger using a USB cable. This connection is possible on the
GL980/GL2000.

Required items

DP-581H printer
●
GL980 or GL2000 midi LOGGER
●
USB cable (Type-A to Type-C) for connecting the printer to the GL980/GL2000
●

Connection procedure

1. Printer configuration
1-1. Turn the printer on.
2. Logger configuration
2-1. Turn the logger on.
3. USB connection
3-1. Connect the Type-A end of the included USB cable to the GL980/GL2000 USB host port
and the Type-C end to the printer.
4. Printer registration
4-1. Press the MENU key on the logger to open the OTHER menu.
4-2. Under the printer function, set the interface to use to USB.
5. Test print
5-1. Perform a test print, and check that it is printed properly.
※ Do not use a USB hub or the like when making a USB connection.
8