Luts - Blackmagicdesign HyperDeck Extreme Control Installation And Operation Manual

Factory Reset
Tap on 'reset HyperDeck' to restore your HyperDeck to factory settings.
Setup Page 5
Analog Input NTSC IRE
For analog NTSC inputs, select between 0.0 IRE and 7.0 IRE depending on the region
you are working in.
Analog Input Levels
When you have selected component video, you can switch between SMPTE and
Betacam levels. SMPTE levels are more common, and even Betacam SP can use
SMPTE, so only switch to Betacam if you are sure that Betacam levels are being used.

LUTs

Display LUTs can be especially helpful when using the HyperDeck Extreme as a field recorder.
They work by telling the unit what color and luminance output to display. This can be useful for
when you are using the 'film' dynamic range on your camera which has an intentionally
undersaturated, 'flat' appearance. By applying a display LUT, you can get an idea of what your
video will look like after it has been graded.
Settings 38