Blackmagicdesign HyperDeck Extreme Control Installation And Operation Manual page 33

DHCP
To connect to your network via a dynamic IP address, toggle the switch to on.
To manually set a static IP address, toggle it to off.
IP address
When DHCP is switched 'off', you can enter your network details manually. Click on the
pencil edit icon. Enter the IP address into the numeric keypad view. Once you have
entered your address, press the 'update' button.
When you edit any numeric option, a numeric keyboard will appear.
Type in the address and press update to confirm.
Gateway
Set your network gateway address by clicking on the pencil icon to open the numeric
keypad. Press update to return to Setup page 1.
Subnet Mask
Your subnet mask can be manually entered by clicking pencil edit icon. Once you have
entered your address, click the update icon to return to the menu.
Setup Page 2
Set your timecode settings on the second setup page
Settings 33